Banana Pi M2

The Banana M2 is a credit card-sized and low-power single-board computer developed in China by the Banana Pi Team, with the intention of promoting the STEM (science, technology, engineering and mathematics) education in schools.

Banana PI M2 is the open source hardware platform, Banana PI M2 is an quad core version of Banana Pi, which is an improvement over the dual-core of the Banana Pi M1, it supports on board Wi-Fi. Banana Pi M2 series runs Android, Debian linux, Ubuntu linux, Raspberry Pi images and other images. Banana PI M2 hardware: 1Ghz ARM7 quad-core processor, 1GB DDR3 SDRAM, Banana PI with Gigabit ethernet port, It can run with Android 4.4 smoothly. The size of Banana PI M2 same as Banana pi M1, it can run games, it supports 1080P high definition video output, the GPIO is compatible with Raspberry Pi B+, and it can run the ROM Image. Note: Banana Pi M2 has no SATA port, so USB must be used to provide hardisk.

Banana Pi M2
CPU A31S ARM Cortex-A7 Quad-Core, 256K[2] B L1 cache 1MB L2 cache
GPU PowerVR SGX544MP2 Comply with OpenGL ES 2.0 OpenCL 1x,DX9_3
Memory 1GB DDR3 (shared with GPU)
Network 10/100/1000 Ethernet 8P8C, Wi-Fi
Video Input A CSI input connector allows for the connection of a designed camera module
Video Outputs HDMI, LVDS/RGB
Audio Outputs 3.5mm jack and HDMI
Power Source 5 volt via Micro USB(DC in Only)and /or Micro USB OTG
USB 2.0 ports 4 USB PORT
GPIO GPIO, UART, I2C BUS, SPI BUS, WITH TWO CHIP SELECTS, ADC, PWM, +3.3V, +5V, GND
LED Power Key & 8P8C
OS Android and Linux etc.OS